P0610 MAZDA Control Module Performance

Possible causes
– ECM Harness power supply circuit is open or shorted
– ECM Programing
– Faulty ECM
Tech description
Check the ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.
When is the obd code mean?
Indicates the ECM has experienced an internal memory fault.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P0610 MAZDA OBD Code Description

The ECM continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This self?check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

Leave a Reply

Your email address will not be published. Required fields are marked *