Skoda P0782 2-3 Shift Malfunction

Description

OBD-II Trouble Code Description for P0782 Skoda

2-3 Shift

What does this mean?

OBD2 Code P0782 Skoda definition:
This P0782 Skoda code indicates that the 2-3 shift valve in the valve body is locked in the direction of the spring compression. The Transmission Control Module (TCM) controls the gearshifts by turning the shift solenoid valves “ON/OFF” and switching oil pressure to the valves in the valve body. The TCM calculates the “actual” transmission gear by comparing the signals from the input speed sensor and the output speed sensor.

Symptoms

Possible sumptoms of OBD code P0782 Skoda
– Engine Light ON (or Service Engine Soon Warning Light) – Transmission may not shift to the next gear.

Causes

Possible causes of OBD code P0782 Skoda
– Low transmission fluid level – Dirty transmission fluid – Faulty shifting solenoid valve – Shifting solenoid valve harness or connectors – Shifting solenoid valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0782 Skoda code is detected when actual gear position and the commanded gear position are different

Possible Solutions


The OBD2 Code Information Be Applicable For Skoda:

2013 Skoda Rapid,2013 Skoda Octavia,2013 Skoda Citigo,2011 Skoda Roomster,2011 Skoda Fabia,2010 Skoda Superb,2009 Skoda Superb,2009 Skoda Octavia,2008 Skoda Fabia,2007 Skoda Fabia,2006 Skoda Roomster,2006 Skoda Octavia,2005 Skoda Octavia,2005 Skoda Fabia,2003 Skoda Superb,2003 Skoda Octavia,2003 Skoda Fabia

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Skoda makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.

Leave a Reply

Your email address will not be published. Required fields are marked *