Land Rover P0472 Exhaust Pressure Sensor Low

Description

OBD-II Trouble Code Description for P0472 Land Rover

Exhaust Pressure Sensor Low

What does this mean?

OBD2 Code P0472 Land Rover definition:
The exhaust back pressure (EBP) sensor is a variable capacitance sensor that, when supplied with a 5-volt reference signal from the Powertrain Control Module (PCM), produces a linear analog voltage signal that indicates pressure. The EBP sensor’s primary function is to measure exhaust back pressure so that the PCM can control the exhaust back pressure regulator (EPR) when needed.

Symptoms

Possible sumptoms of OBD code P0472 Land Rover
– Engine Light ON (or Service Engine Soon Warning Light)

Causes

Possible causes of OBD code P0472 Land Rover
– Exhaust Back Pressure Sensor The Error code is generally activated on detection of the following conditions: An EBP signal that is detected out of range (high or low) by the PCM will cause the engine to ignore the EBP signal and disable exhaust back pressure operation.

Possible Solutions

Replacing the exhaust back pressure usually takes care of the problem


The OBD2 Code Information Be Applicable For Land Rover:

2013 Land Rover,2012 Land Rover,2011 Land Rover,2010 Land Rover,2009 Land Rover ,2008 Land Rover,2007 Land Rover,2006 Land Rover,2005 Land Rover,2004 Land Rover,2003 Land Rover,2002 Land Rover

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Land Rover makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.