Mazda P0761 Shift Solenoid C Performance or Stuck Off

Description

OBD-II Trouble Code Description for P0761 Mazda

Shift Solenoid “C” Performance or Stuck Off

What does this mean?

OBD2 Code P0761 Mazda definition:
Shift solenoid valve C is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.

Symptoms

Possible sumptoms of OBD code P0761 Mazda
– Engine Light ON (or Service Engine Soon Warning Light) – Transmission will not shift gears.

Causes

Possible causes of OBD code P0761 Mazda
– Low transmission fluid level – Dirty transmission fluid – Faulty shift solenoid C valve – Shift solenoid C valve harness or connectors – Shift solenoid C valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0761 Mazda code is detected when the ECM has detected a mechanical fault with the solenoid energized, valve stuck off

Possible Solutions


The OBD2 Code Information Be Applicable For Mazda:

2013 Mazda MX-5,2013 Mazda CX-9,2013 Mazda CX-5,2013 Mazda 6,2013 Mazda 5,2013 Mazda 3,2012 Mazda CX-5,2012 Mazda BT-50,2012 Mazda 3,2011 Mazda 6,2011 Mazda 5,2011 Mazda 2,2010 Mazda CX-7,2010 Mazda 3,2009 Mazda RX-8,2009 Mazda MX-5,2009 Mazda CX9,2009 Mazda 6,2009 Mazda 2,2008 Mazda MX-5,2008 Mazda 6,2008 Mazda 5,2008 Mazda 2,2007 Mazda CX-9,2007 Mazda CX-7,2006 Mazda MX5,2006 Mazda 6,2006 Mazda 3,2005 Mazda Atenza,2005 Mazda 6,2004 Mazda MPV,2004 Mazda 6,2004 Mazda 5,2004 Mazda 3,2003 Mazda RX-8

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Mazda makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.