Mini P0796 Pressure Control Solenoid C Stuck Off

Description

OBD-II Trouble Code Description for P0796 Mini

Pressure Control Solenoid “C” Performance or Stuck off

What does this mean?

OBD2 Code P0796 Mini definition:
The Engine Control Module (ECM) uses signals from the vehicle speed sensor to detect the actual gear position (1st, 2nd, 3rd, 4th or 5th gear). Then the ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical troubles of the shift solenoid valves and valve body.

Symptoms

Possible sumptoms of OBD code P0796 Mini
– Engine Light ON (or Service Engine Soon Warning Light) – Shift shock

Causes

Possible causes of OBD code P0796 Mini
– Low transmission fluid level – Dirty transmission fluid – Faulty pressure control solenoid valve – Pressure control solenoid valve harness or connectors – Pressure control solenoid valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The gear required by the ECM does not match the actual gear when driving

Possible Solutions


The OBD2 Code Information Be Applicable For Mini:

2013 Mini Vision Concept,2013 Mini Roadster,2013 Mini Cooper,2013 Mini Countryman,2013 Mini Clubvan Camper,2013 Mini Clubvan,2013 Mini Clubman Bond Street,2012 Mini Rocketman Concept,2012 Mini Coupe,2012 Mini Clubvan Concept,2012 Mini Bayswater,2012 Mini Baker Street,2011 Mini WRC,2010 Mini Scooter,2009 Mini Cooper,2008 Mini One,2008 Mini Cooper,2008 Mini Clubman,2007 Mini Cooper,2006 Mini Concept,2005 Mini Cooper,2004 Mini XXL,2004 Mini Cooper,2002 Mini Cooper,2000 Mini Seven,2000 Mini Cooper

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Mini makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.