Opel P0457 EVAP System Leak Detected/Fuel Fill Cap Loose Or Missing

Description

OBD-II Trouble Code Description for P0457 Opel

Evaporative Emission System Leak Detected (fuel cap loose/off)

What does this mean?

OBD2 Code P0457 Opel definition:
A fuel tank pressure change less than a minus (-) 7 inches of water in 30 seconds has occurred after refueling; or there is excessive purge (fuel vapor) flow greater than 0.06 pounds per minute.

Symptoms

Possible sumptoms of OBD code P0457 Opel
– Engine Light ON (or Service Engine Soon Warning Light) – Possible a noticeable fuel odor caused by the release of fuel vapors – Fuel cap indicator lamp (FCIL) may be illuminated.

Causes

Possible causes of OBD code P0457 Opel
– Damaged, missing or loosely installed fuel filler cap. The Error code is generally activated on detection of the following conditions: EVAP control system has a very large leak such as fuel filler cap fell off

Possible Solutions

Check for a loose, missing or damage fuel filler the cap.


The OBD2 Code Information Be Applicable For Opel:

2013 Opel Astra OPC,2013 Opel Adam,2012 Opel Zafira Tourer,2012 Opel Combo,2012 Opel Astra GTC,2012 Opel Ampera,2011 Opel Zafira,2011 Opel Meriva,2011 Opel Corsa,2011 Opel Astra,2011 Opel Antara,2010 Opel Insignia,2010 Opel Corsa,2010 Opel Astra,2008 Opel Corsa,2007 Opel GT,2007 Opel Corsa,2007 Opel Astra,2007 Opel Antara,2006 Opel Vectra,2006 Opel Meriva,2006 Opel Astra,2005 Opel Astra,2004 Opel Astra,2003 Opel Signum,2003 Opel Meriva

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Opel makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.