Saab P0244 Turbo/Super Charger Wastegate Solenoid A

Description

OBD-II Trouble Code Description for P0244 Saab

Turbo/Super Charger Wastegate Solenoid “A” Range/Performance

What does this mean?

OBD2 Code P0244 Saab definition:
The PCM monitors the supercharger (boost) bypass (SCB) solenoid circuit for an electrical failure. The test fails when the signal moves outside the minimum or maximum allowable calibrated parameters for a specified SCB solenoid duty cycle (100% or 0%) by PCM command.

Symptoms

Possible sumptoms of OBD code P0244 Saab
– Engine Light ON (or Service Engine Soon Warning Light)

Causes

Possible causes of OBD code P0244 Saab
– VPWR circuit open to SCB solenoid. – SCB solenoid circuit shorted to PWR GND or CHASS SaabIS GND. – Damaged SCB solenoid. – SCB solenoid circuit open. – SCB solenoid circuit shorted to VPWR. – Damaged

Possible Solutions

Disconnect SCB solenoid. Connect test lamp to SCB solenoid harness connector. Cycle SCB driver in PCM by Output Test Mode. Test lamp cycle on and off – SCB solenoid is suspect. Test lamp always on – SCB signal short in harness or PCM. Test always off – SCB signal or VPWR open in harness or PCM.


The OBD2 Code Information Be Applicable For Saab:

2012 Saab 9-5,2012 Saab 9-4X,2011 Saab PhoeniX Concept,2010 Saab 9-5 Sedan,2010 Saab 9-3,2010 Saab 9-3X,2008 Saab Turbo X,2008 Saab 9-X,2008 Saab 9-7X,2008 Saab 9-4X,2008 Saab 9-3,2008 Saab 9-3,2008 Saab 9-3,2006 Saab 9-7X,2006 Saab 9-5,2006 Saab 9-3,2005 Saab 9-5,2005 Saab 9-3,2005 Saab 9-2,2003 Saab 95,2003 Saab 93

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Saab makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.