Description
OBD-II Trouble Code Description for P0704 Saab
Clutch Switch Input Circuit Malfunction
What does this mean?
OBD2 Code P0704 Saab definition:
When the clutch pedal is depress the voltage signal from the clutch switch to the Engine Control Module (ECM) is low. If the ECM does not see this change from high to low when the vehicle is over 0 mph, the ECM sets code P0704 Saab.
Symptoms
Possible sumptoms of OBD code P0704 Saab
– Engine Light ON (or Service Engine Soon Warning Light)
Causes
Possible causes of OBD code P0704 Saab
– Open or short clutch switch circuit – Poor clutch switch circuit connection – Damage clutch switch – Misadjusted clutch switch – Damage ECM The Error code is generally activated on detection of the following conditions: ECM did not detect any movement in the clutch pedal position switch
Possible Solutions
Check clutch switch adjustment, the switch should open and close when the clutch pedal is depress. If the switch is properly adjusted, replaced the clutch switch to resolve problem.
The OBD2 Code Information Be Applicable For Saab:
2012 Saab 9-5,2012 Saab 9-4X,2011 Saab PhoeniX Concept,2010 Saab 9-5 Sedan,2010 Saab 9-3,2010 Saab 9-3X,2008 Saab Turbo X,2008 Saab 9-X,2008 Saab 9-7X,2008 Saab 9-4X,2008 Saab 9-3,2008 Saab 9-3,2008 Saab 9-3,2006 Saab 9-7X,2006 Saab 9-5,2006 Saab 9-3,2005 Saab 9-5,2005 Saab 9-3,2005 Saab 9-2,2003 Saab 95,2003 Saab 93
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Saab makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.