Seat P0530 Air Conditioning Refrigerant Pressure Sensor Circuit

Description

OBD-II Trouble Code Description for P0530 Seat

A/C Refrigerant Pressure Sensor “A” Circuit

What does this mean?

OBD2 Code P0530 Seat definition:
The powertrain control module (PCM) monitors the high side refrigerant pressure via a A/C refrigerant pressure sensor. When the pressure is high the signal voltage is high. When the pressure is low the signal voltage is low. When pressure is high the PCM commands the cooling fans on. When pressure is too high or too low the PCM will not allow the A/C compressor clutch to engage.

Symptoms

Possible sumptoms of OBD code P0530 Seat
– Engine Light ON (or Service Engine Soon Warning Light) – A/C Inoperative – A/C Blows Warm

Causes

Possible causes of OBD code P0530 Seat
– A/C system low or over charge with refrigerant – Faulty A/C refrigerant pressure sensor – Cooling fans in-operative – A/C refrigerant pressure sensor circuit open or shorted The Error code is generally activated on detection of the following conditions: The P0530 Seat code is detected when the signal circuit is less than 5 counts (0.09 volt) or more than 250 counts (4.90 volts) and the condition exists for 20 seconds.

Possible Solutions


The OBD2 Code Information Be Applicable For Seat:

2013 Seat Mii,2013 Seat Leon,2013 Seat Ibiza Cupra,2013 Seat Ibiza,2012 Seat Toledo Concept,2012 Seat Exeo ST,2012 Seat Exeo,2012 Seat Alhambra 4WD,2011 Seat Ibiza,2010 Seat Ibiza,2009 Seat Leon,2009 Seat Ibiza,2009 Seat Altea,2007 Seat Altea,2006 Seat Leon,2006 Seat Ibiza,2005 Seat Toledo,2005 Seat Altea,2004 Seat Ibiza,2004 Seat Cordoba,2002 Seat Ibiza

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Seat makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.