Skoda P0329 Knock Sensor Circuit Intermittent

Description

OBD-II Trouble Code Description for P0329 Skoda

Knock Sensor 1 Circuit Input Intermittent

What does this mean?

OBD2 Code P0329 Skoda definition:
The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Powertrain Control Module (PCM) or Engine Control Module (ECM).

Symptoms

Possible sumptoms of OBD code P0329 Skoda
– Engine Light ON (or Service Engine Soon Warning Light) – Lack/Loss of Power

Causes

Possible causes of OBD code P0329 Skoda
– Knock sensor circuit short to GND. – Knock sensor circuit short to PWR. – Knock sensor circuit open. – Damaged knock sensor. – Powertrain Control Module (PCM The Error code is generally activated on detection of the following conditions: – An intermittent voltage from the sensor is sent to Powertrain Control Module (PCM) or Engine Control Module (ECM)

Possible Solutions

– Repair or resecure harness or connector – Replaced knock sensor


The OBD2 Code Information Be Applicable For Skoda:

2013 Skoda Rapid,2013 Skoda Octavia,2013 Skoda Citigo,2011 Skoda Roomster,2011 Skoda Fabia,2010 Skoda Superb,2009 Skoda Superb,2009 Skoda Octavia,2008 Skoda Fabia,2007 Skoda Fabia,2006 Skoda Roomster,2006 Skoda Octavia,2005 Skoda Octavia,2005 Skoda Fabia,2003 Skoda Superb,2003 Skoda Octavia,2003 Skoda Fabia

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Skoda makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.