Description
OBD-II Trouble Code Description for P0451 Subaru
Evaporative Emission System Pressure Sensor/Switch Range/Performance
What does this mean?
OBD2 Code P0451 Subaru definition:
The EVAP control system pressure sensor detects pressure in the purge line. The sensor output voltage to the ECM increases as pressure increases. The EVAP control system pressure sensor is not used to control the engine system. It is used only for on board diagnosis.
Symptoms
Possible sumptoms of OBD code P0451 Subaru
– Engine Light ON (or Service Engine Soon Warning Light)
Causes
Possible causes of OBD code P0451 Subaru
– The EVAP control system pressure sensor circuit is open or shorted – Rubber hose to EVAP control system pressure is clogged, vent, kinked, disconnected or improper connection. – EVAP control system pressure sensor may be faulty – EVAP The Error code is generally activated on detection of the following conditions: – An improper voltage signal from EVAP control system pressure sensor is sent to ECM.
Possible Solutions
The OBD2 Code Information Be Applicable For Subaru:
2013 Subaru WRX Concept,2013 Subaru Viziv Concept,2013 Subaru Outback,2013 Subaru Legacy,2013 Subaru Impreza,2013 Subaru BRZ,2012 Subaru XV,2012 Subaru Impreza,2011 Subaru XV Concept,2011 Subaru Outback,2011 Subaru Impreza,2011 Subaru Forester,2010 Subaru Legacy,2010 Subaru Impreza,2009 Subaru Impreza,2008 Subaru Impreza,2008 Subaru Forester,2006 Subaru Impreza,2005 Subaru R1,2005 Subaru Pleo,2004 Subaru Impreza,2004 Subaru Forester,2003 Subaru Traviq
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Subaru makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.