Subaru P0534 Air Conditioning (A/C) Refrigerant Charge Loss

Description

OBD-II Trouble Code Description for P0534 Subaru

Air Conditioner Refrigerant Charge Loss

What does this mean?

OBD2 Code P0534 Subaru definition:
The powertrain control module (ECM) monitors the high side refrigerant pressure via a A/C refrigerant pressure sensor. When the pressure is high the signal voltage is high. When the pressure is low the signal voltage is low. When pressure is high the ECM commands the cooling fans on. When pressure is too high or too low the PCM will not allow the A/C compressor clutch to engage.

Symptoms

Possible sumptoms of OBD code P0534 Subaru
– Engine Light ON (or Service Engine Soon Warning Light) – A/C Inoperative – A/C Blows Warm

Causes

Possible causes of OBD code P0534 Subaru
– A/C system low or over charge with refrigerant – Faulty A/C refrigerant pressure sensor – Cooling fans in-operative – A/C refrigerant pressure sensor circuit open or shorted The Error code is generally activated on detection of the following conditions: The ECM has detected that the AC compressor clutch cycle rate is high

Possible Solutions


The OBD2 Code Information Be Applicable For Subaru:

2013 Subaru WRX Concept,2013 Subaru Viziv Concept,2013 Subaru Outback,2013 Subaru Legacy,2013 Subaru Impreza,2013 Subaru BRZ,2012 Subaru XV,2012 Subaru Impreza,2011 Subaru XV Concept,2011 Subaru Outback,2011 Subaru Impreza,2011 Subaru Forester,2010 Subaru Legacy,2010 Subaru Impreza,2009 Subaru Impreza,2008 Subaru Impreza,2008 Subaru Forester,2006 Subaru Impreza,2005 Subaru R1,2005 Subaru Pleo,2004 Subaru Impreza,2004 Subaru Forester,2003 Subaru Traviq

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Subaru makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.