Description
OBD-II Trouble Code Description for P0781 Subaru
1-2 Shift
What does this mean?
OBD2 Code P0781 Subaru definition:
This P0781 Subaru code indicates that the 1-2 shift valve in the valve body is locked in the direction of the spring compression. The Transmission Control Module (TCM) controls the gearshifts by turning the shift solenoid valves “ON/OFF” and switching oil pressure to the valves in the valve body. The TCM calculates the “actual” transmission gear by comparing the signals from the input speed sensor and the output speed sensor.
Symptoms
Possible sumptoms of OBD code P0781 Subaru
– Engine Light ON (or Service Engine Soon Warning Light) – Transmission may not shift to the next gear.
Causes
Possible causes of OBD code P0781 Subaru
– Low transmission fluid level – Dirty transmission fluid – Faulty shifting solenoid valve – Shifting solenoid valve harness or connectors – Shifting solenoid valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0781 Subaru code is detected when actual gear position and the commanded gear position are different
Possible Solutions
The OBD2 Code Information Be Applicable For Subaru:
2013 Subaru WRX Concept,2013 Subaru Viziv Concept,2013 Subaru Outback,2013 Subaru Legacy,2013 Subaru Impreza,2013 Subaru BRZ,2012 Subaru XV,2012 Subaru Impreza,2011 Subaru XV Concept,2011 Subaru Outback,2011 Subaru Impreza,2011 Subaru Forester,2010 Subaru Legacy,2010 Subaru Impreza,2009 Subaru Impreza,2008 Subaru Impreza,2008 Subaru Forester,2006 Subaru Impreza,2005 Subaru R1,2005 Subaru Pleo,2004 Subaru Impreza,2004 Subaru Forester,2003 Subaru Traviq
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Subaru makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.